How to Mount Starlink on a Pole: Complete Guide

To mount Starlink on a pole, sink a 1.5''–2'' galvanized pipe in a 24''-deep concrete footing (below frost line), let it cure 48 hours, then slide the Starlink Pipe Adapter over the top and hand-tighten. Pole height should exceed the tallest nearby obstruction by 2ft.

Choosing the Right Pole

Use 1.5'' to 2'' outer-diameter galvanized steel or Schedule 40 pipe. Length: total height + 30''–36'' underground. For heights over 20ft, step up to 2'' or add a guy-wire system.

Setting the Concrete Footing

Dig a hole 12'' wide and 30''–36'' deep (below frost line in your region). Set pole plumb using a post level, brace with 2x4 stakes. Fill with fast-setting concrete (Quikrete Fast-Setting bag). Slope the top of the concrete slightly away from the pole for water runoff. Cure 48 hours before mounting the dish.

Attaching Starlink to the Pole

Slide the Starlink Pipe Adapter (or third-party pipe mount) over the pole. Hand-tighten the set screws. Attach the dish to the adapter. Power on — self-alignment takes 10–15 min. Verify obstruction check in the app.

Cable Run and Grounding

Bury cable in conduit if crossing a yard (protects from mowers). Ground the pole with a #6 copper wire to a ground rod near the base, per NEC. Bring cable into the house through a weather-sealed pass-through.

Frequently Asked Questions

How tall should my Starlink pole be?

Tall enough to clear all obstructions in the northern sky by 2ft. Typical is 10–20ft above ground.

What size pipe fits the Starlink pipe adapter?

The official adapter fits 1.5'' to 2'' outer diameter pipe.

Do I need to ground the pole?

Yes, per NEC. Ground with a #6 copper wire and 8ft ground rod.

Can I mount without concrete?

Not recommended for permanent installs. Freestanding brackets or driven ground anchors work for temporary setups.

How far can the pole be from my house?

Starlink cable comes in 50ft and 150ft lengths. Bury cable in conduit for runs across a yard.

Ready to install? InstallPros offers professional Starlink installation nationwide starting at $299. Get your instant quote →